product manual:
The main function of the IPX8 waterproof testing machine is to test the physical and other related properties of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts under climatic conditions that simulate rain. . After the test, check whether the performance of the product meets the requirements through verification, so as to facilitate the design, improvement, verification and factory inspection of the product. Comply with IEC60529:2001 "DeSCees of protection provided by enclosures (IP Code)", GB4208-2008 "Enclosure Protection Level (IP Code)" 14.2.8 and GB7000.1 "Lamps Part 1: General Requirements and Tests" 9.2.9 The requirements of the terms.
Product specification
*Observation window size: super large window, tempered glass
*Test bed speed (rpm): 1°～5° adjustable
*Turntable size (diameter): φ300MM
*Turntable load: 20KG
*Radius of water spray ring: 375 (mm)
*Swing angle range of spray pipe: 45°, 90°, 120°, 180° (can be set)
*The diameter of the spray hole (mm): φ0.4
*Water jet aperture spacing (mm): 50
*Flow rate of each spray hole: 0.07L/min ± 5%
*Water spray pressure (Kpa): 50～300 adjustable
*Swing tube swing: (200°)
*Swing speed of spray pipe: (60°/s) can be set
*Test time:
*The distance between the sample and the equipment: >200mm
*Power supply: AC 1ψ 3W 220V 50HZ
*Inner box size (D×W×H): 1000×1000×1000 (mm)
*Dimensions (D×W×H): 1160×1360×1840 (mm)
