Product use:
This test machine is designed for the reciprocating fatigue test of the pull rod of the case. Under certain pulling out and pressing frequency, the pull rod lock and pull rod of the case are continuously switched, pulled out and pressed to check the reciprocating fatigue performance of the pull rod, the structural fastness of the pull rod and the durability of the switch.So the test bar produced gap, loose, even rod fault, deformation, and so on
Product specification
*QB/ t2919-2007 test method for fatigue resistance of luggage pull rod,CNS15331
* test (cylinder) travel :20-80cm adjustable
* test speed :10-30 times/min (repeat once in a cycle), adjustable
* the test number is 1-999,999, and the counter reaches the set number of automatic stop, with memory function of power off
* test the dynamic pressure cylinder
* the height of specimens is up to 150cm
* test space :100*100*230cm
* stationary clamping seat for auxiliary equipment
* height adjustment: manual adjustment
* air pressure: 5-8 KGF/c ㎡ by advertisers
* power supply 1 is less than 220V/50HZ
